Our Location
HighpowerV Towers,
#61, 5th Cross St, Logaiah Colony,
Saligramam, Chennai - 600 093.
+91 44 4200 1234 | +91 98408 44817
Email Us : info@hpvexports.com
Products
- Bauxite Used for Aluminum Production
- Use of Bauxite as an Abrasive
- Use of Bauxite as a Proppant
TECHNICAL DATA SHEET OF BAUXITE
CHEMICAL PROPERTIES:
| Name | Value |
|---|---|
| Alumina (Al2O3) | 65.00 % |
| Silica (SiO2) | 11.00% |
| Ferric Oxide (Fe2O3) | 0.15 % |
| Calcium oxide (CaO) | 0.25 % |
| Magnesium oxide (MgO) | 0.01 % |
| LOI | 15 % |
BARITE API - 13A POWER
| CHARACTERISTICS | USES |
|---|---|
| Natural, Ultra-fine Barite API Powder, manufactured from very high purity barite lumps | Applying for oil drilling mud and other fields |
PHYSICAL PROPERTIES OF RAW MATERIAL
| Values | |
|---|---|
| Specific Gravity | 4.20 g/cm3 |
| Residue greater than 75 iim (%) | 2.10% |
| Particles less than 6 gm equivalent spherical diameter (%) | 25% |
| Water soluble Alkaline Earth Metal as Ca (mg Ca/Kg) | 250 mg/kg |
CHEMICAL ANALYSIS OF THE RAW MATERIAL
| COMPOUND | Values |
|---|---|
| BaSO4 | 90% |
| Min Cd (ppm) | 0.7 Max |
| Hg (ppm) | 0.05 Max |
| As (ppm) | 0.1 max |
| Pb | 0.087% Max |
TECHNICAL DATA OF THE PRODUCED MATERIAL
| Moisture | 0.5% |
| Odor | Odorless |
It is used in a wide variety of applications:
- Gypsum board is primarily used as a finish for walls and ceilings, and is known in construction as drywall, sheetrock or plasterboard.
- Gypsum blocks are used like concrete blocks in building construction.
- Gypsum mortar is an ancient mortar used in building construction.
- Plaster ingredients are used in surgical splints, casting moulds and modeling.
- Fertilizer and soil conditioner
TECHNICAL SPECIFICATION OF GYPSUM
| Chemical Parameters | Specifications | Rejection limits |
|---|---|---|
| CaSO4.2H20 (purity) | 92 % - Min | Less than 90 % |
| Moisture(free water) | 2 % Max | More than 3% |
| Calcium Oxide(CaO) | 31 % (MIN) | |
| Sulphur (SO3) | 42.00 % (MIN) | |
| Combined Water | 18.5 % (MIN) | |
| MgO | 2 % (MAX) | |
| Iron Oxide - Fe2O3 | 0.10 % |
Uses of Limestone
Limestone is a rock with an enormous diversity of uses. It could be the one rock that is used in more ways than any other. Most limestone is made into crushed stone and used as a construction material. It is used as a crushed stone for road base and railroad ballast.
- It is used as an aggregate in concrete.
- It is fired in a kiln with crushed shale to make cement.
- In Roofing Granules
- In Portland cement manufacturer in manufacture Lime such as Quick lime & Hydrated lime
- Powdered limestone is used as filler in paper, paint, rubber and plastics.
- Crushed limestone is used as a filter stone in on-site sewage disposal systems.
- Powdered limestone is also used as a sorbent at many coal-burning facilities.
- As a Flux material in Iron & Steel industry
- As a Flux material in Iron & Steel industry
- As Animal Feed Filler
TECHNICAL SPECIFICATION OF LIME STONE
| Parameter | Value |
|---|---|
| CaCO3 | 98.5 % |
| MgO | 0.16 % |
| Fe2O3 | 0.1 % |
| Al2O3 | 0.05% |
| SiO2 | 0.08 % |
| Na2O | 0.16 % |
| Brightness | 94 % |
| Whiteness | 97 % |
| Oil Absorption | 24 g /100 g CaCo3 |
| Content LOI | 43.08% |
Quartz is one of the most useful natural materials. Its usefulness can be linked to its physical and chemical properties. It has a hardness of seven on the Mohs Scale which makes it very durable. It is chemically inert in contact with most substances. It has electrical properties and heat resistance that make it valuable in electronic products. Its luster, color and diaphaneity make it useful as a gemstone and also in the making of glass.
- Uses of Quartz in Glass Making
- Uses of Quartz as an Abrasive
- Uses of Quartz as a Foundry Sand
- Uses in the Petroleum Industry
TECHNICAL SPECIFICATION OF LIME STONE
| Parameter | Value |
|---|---|
| SiO2 | 99% |
| Fe2O3 | 0.08% |
| Al2O3 | 0.03% |
| LOI | 0.09% |
| Melting Point | 1600 C |
| Boiling Point | 2230 C |
| Color | Clear white |
| Whiteness | 95% � 98% |
Chemical Composition
| Parameter | Value |
|---|---|
| Total Silica as SiO2 | 85% |
| Chloride as Cr | 0.02% |
| Magnesium Oxide as Mgo | 4.43% |
| Sodium Oxide as Na2O | 0.14% |
| Potassium Oxide as K2O | 0.15% |
| Total Alkalinity as Na2O+0.658 K2O | 0.24% |
| Free Calcium Oxide | 0.16% |
| Free Silicon | 0.03% |
| Loss on Ignition | 1.91% |
| Specific Surface Area | 18.2 m2/g |
| Moisture | 0.9% |
| Density | 540kg/m3 |
TECHNICAL SPECIFICATION OF SILICA SAND ORIGIN - EGYPT
| Parameter | Value | ||
|---|---|---|---|
| Total Silica as Si02 | 99.3% | ||
| Ferric oxide as Fe203 | 0.03% | ||
| Aluminum Oxide as Al203 | 0.208% | ||
| Loss on Ignition at 950�C | 0.26% | ||
| Potassium Oxide as K20 | 0.008% | ||
| Turbitidy (FTU) | 250 | ||
| Porosity | 40- 41.5% | ||
| Sphericity | 0.70 - 0.80 | ||
| Roundness | 0.71 - 0.80 | ||
| Hardness | 7.00 (Moh's) | ||
| Specific Gravity | 2.62 - 2.65 g/cc | ||
| Bulk Density | 1.50 - 1.55 kg/lit |
| Constituent (mm) | Result (%) |
|---|---|
| +0.850 | 0.54 |
| +0.600 - 0.850 | 2.05 |
| +0.425 - 0.600 | 17.66 |
| +0150 - 0.425 | 77.88 |
| - 0.150 | 1.87 |
TEST REPORT
| Tests | Results(%) | Protocol |
|---|---|---|
| Al2O3 | 32.81 | ASTM C 618 |
| CaO | 1.42 | ASTM C 618 |
| Fe2O3 | 4.77 | ASTM C 618 |
| MgO | 1.04 | ASTM C 618 |
| SiO2 | 56.76 | ASTM C 618 |
| LOI | 0.20 | ASTM C 618 |
| + 45 Micron | 24.87 | ASTM C 618 |
Products
PRODUCT SPECIFICATION OF GROUND CALCIUM CARBONATE
ORIGIN: VIETNAM
| CHEMICAL COMPONENTS | PHYSICAL CHARACTERISTICS | ||
|---|---|---|---|
| CaCO3 content | > 99% | Brightness | > 94% |
| MgO content | < 0,16% | Whiteness | > 97% |
| Fe203 content | < 0,01% | Moisture | < 0,2% |
| Al203 content | < 0,04% | Proportion | 1g/cm3 |
| S102 content | < 0,01% | Oil absorption | > 24g/100g |
| CaCO3 Na2O content | < 0,16% | Content loss on ignition | < 43,08% |
Available particle size:
| PRODUCTS | MESH SIZE |
|---|---|
| D50 1.5+0.2um
D97 8+2 um |
1350 MESH |
| D50 2+0.3um
D97 10+2 um |
1250 MESH |
| D50 2.7+0.3um
D97 17+3 um |
800 MESH |
| D50 3.7+0.3um
D97 24+3 um |
500 MESH |
| D50 4.7+0.3um
D97 30+3 um |
450 MESH |
| D50 5.7+0.3um
D97 37+3 um |
400 MESH |
The main use of the mineral China clay is the production of paper; its use ensures the gloss on some grades of coated paper
Kaolin is used (or was used in the past):
- In ceramics (it is the main component of porcelain)
- In toothpaste
- As a light diffusing material in white incandescent light bulbs
- In cosmetics
- In paint to extend the titanium dioxide (TiO2) white pigment and modify gloss levels
TECHNICAL SPECIFICATION OF CHINA CLAY
| Parameter | Value (Approx) |
|---|---|
| Al2O3 | 36% |
| SIO2 | 44% |
| Fe2O3 | 0.5% |
| Na2O | 0.15% |
| K2O | 0.13% |
| TiO2 | 0.06% |
| Chloride | Chloride |
| Water Soluble | 0.09 |
| Acid Soluble | 1.3 |
| Sp. Gravity | Sp. Gravity |
| Water Of Plasticity | 50% |
| Oil Absorption | 36.30 ml / 100 g |
| LOI | 14 |
Dolomite and limestone are used in similar ways. They are crushed and used as an aggregate in construction projects. They are kiln-fired in the manufacture of cement. They are cut into blocks and slabs for use as a dimension stone. They are calcined to produce lime. In some of these uses, dolomite is preferred. Its greater hardness makes it a superior construction material. Its lower solubility makes it more resistant to the acid content of rain and soil.
In the chemical industry, dolomite is used as a source of magnesia (MgO). The steel industry uses dolomite as a sintering agent in processing iron ore and as a flux in the production of steel. In agriculture, dolomite is used as a soil conditioner and as a feed additive for livestock. Dolomite is used in the production of glass and ceramics. Dolomite has been used as a minor source of magnesium, but today most magnesium is produced from other sources.
TECHNICAL SPECIFICATION OF DOLOMITE:
| Parameter | Value |
|---|---|
| MgO | 20% Min |
| CaO | 30% Min |
| SiO2 | 0.15% Max |
| Fe2O3 | 0.10% Max |
| TiO2 | Traces |
The only ores of chromium are the minerals chromite and magnesio chromite.
The two main products of chromite refining are ferrochromium and metallic chromium; for those products the ore smelter process differs considerably.
For the production of ferrochromium the chromite ore (FeCr2O4) is reduced with either aluminium or silicon in an alumino thermic reaction and for the production of pure chromium the iron has to be separated from the chromium in a two step roasting and leaching process.
Chromite is also used as a refractory material, because it has a high heat stability.
The chromium extracted from chromite is used in chrome plating and alloying for production of corrosion resistant super alloys, nichrome, and stainless steel. Chromium is used as a pigment for glass, glazes, and paint, and as an oxidizing agent for tanning leather.
TECHNICAL SPECIFICATION OF DOLOMITE:TECHNICAL SPECIFICATION OF CHROME ORE
| Parameter | Value |
|---|---|
| Cr2O3 | 32-34 (base 34) |
| Cr/Fe | 2.2 Min |
| Fe | 12% Max |
| Al2O3 | 15% Max |
| MgO | 22% Max |
| SiO2 | 12% Max |
| P , S | 0.09% Max |
Garnet sand is a good abrasive, and a common replacement for silica sand in sand blasting. Mixed with very high pressure water, garnet is used to cut steel and other materials in water jets. For water jet cutting, garnet extracted from hard rock is suitable since it is more angular in form, therefore more efficient in cutting. Garnet paper is favored by cabinetmakers for finishing bare wood. Garnet sand is also used for water filtration media.
Typical Analysis - Mineralogical
| Garnet | 98% |
| Illmenite | 1.0% |
| Monazite | 0.3% |
| Rutile | 0.2% |
| Zircon | 0.2% |
| Silliminate | 0.4% |
| Quartz | 0.2% |
Physical properties
| Specific Weight | 4.1 g/cm3 |
| Average Bulk Density | 2.4 g/cm3 |
| Hardness | 8.0 (Mohs Scale) |
| Grain shape | Sharp Angular |
| Grain shape | <9 Micro Siemens/Meter |
| Acid Solubility (HCL) | < 1 % |
| Chloride level | < 25 ppm |
| Moisture | 0.25 % |
| Moisture | None |
Chemical Composition
| Alumina (as Al2O3) | 31% |
| Iron (as Fe2O3) | 31% |
| Iron (as Fe2O3) | 35% |
| Iron (as Fe2O3) | 1.3% |
| Calcium (as CaO) | 1.5% |
| Magnesium (as MgO) | 7% |
| LOI | Nil |
Feldspar is a common raw material used in glassmaking, ceramics, and to some extent as a filler and extender in paint, plastics, and rubber.
In glassmaking, alumina from feldspar improves product hardness, durability, and resistance to chemical corrosion. In ceramics, the alkalis in feldspar (calcium oxide, potassium oxide, and sodium oxide) act as a flux, lowering the melting temperature of a mixture.
Fluxes melt at an early stage in the firing process, forming a glassy matrix that bonds the other components of the system together.
TECHNICAL SPECIFICATION OF POTASH FELDSPAR
| Parameter | Value |
|---|---|
| K2O | 11% |
| Na2O | 2% |
| Al2O3 | 17% |
| SiO2 | 66% |
| Fe2O3 | 0.08% |
| Mesh (BSS) | Available in Chips, grains and powder form |
TECHNICAL SPECIFICATION OF SODA FELDSPAR
| Parameter | Value |
|---|---|
| K2O | 2% |
| Na2O | 8% |
| Al2O3 | 17% |
| SiO2 | 66% |
| Fe2O3 | 0.15% |
| Mesh (BSS) | Available in Chips, grains and powder form |
TECHNICAL SPECIFICATIONS OF FLUORSPAR
Our Fluorspar having minimum of 75.00% Calcium Fluorite (CaF2) with minimal Silica and Sulphur content and its mining under strict quality control, it is well suited for steel industry
Specifications:
Captive Mines:
Having strategic tie up with potential miners across the globe by investing in their mines and entered in to long term supply contract,For Fluorspar,
| Origin | : | Pakistan |
| Extent | : | 100 Ha |
| Available grade | : | CaF2 75% to 85% |
| Location | : | Balochistan, 700 km to Karachi Port, Pakistan |
Packing:
Jumbo bags (1 or 1.5 MT) with liner inside, or as per customer requirements. Note: Even, we have customized physical sizes as per client's requirements.
TECHNICAL SPECIFICATIONS OF SILICA RAMMING MASS
Our Silica Ramming mass is a product of crystalline quartz having 99.00% Silicon dioxide (SiO2) with minimal Alumina (< 1200 PPM) & Iron Content (< 1500 PPM) and manufactured under strict quality control, it is suitable for with standing higher temperature up to 1700Oc
Specifications:
| 99.00% | |||
| Al2O3 | 0.12% | ||
| Fe2O3 | 0.15% | ||
| 1230 Oc | |||
| Porosity | 50 | ||
| Bulk Density | 2.5 Ton/M3 | ||
| Grain Size | 0 MM to 8 MM (Depends on furnace capacity) | ||
| Binder | 1.3% of Boric Acid |
In addition to all we guarantee more lining life with our material compared to any other. While sending your quarries and orders please do specify the capacity of furnace to enable us to give you the correct combination of grains size & binder.
Packing:
- Standard Pack available in 50 kg. HDPE bags
- Jumbo bags (1 or 1.5 MT) with liner inside, or as per customer requirements.
Note: Even, we have customized products as per client's requirements / as per their furnace capacity.